To receive a free CNG conversion estimate send an email to younkin@gmail.com with “Estimate” in the email’s subject line and include the following information:
- Your name, address and phone number.
- Your vehicle’s make (Honda, etc.).
- Your vehicle’s model (Accord, etc.).
- Your vehicle’s year of manufacture.
- The number of cylinders in your vehicle’s engine (4, 6, etc.).
We will get back to you with an estimate in a timely manner.
Hi Jim,
I have two vehicles I’d like to convert to CNG, the first is a 1977 Ford Ranchero, 351ci carbureted V8, the second a 2001 Chrysler mini-van, 3.8l.
I’ve done some Internet browsing and found a couple sites, but it seems there are not a lot of systems/kits out there. I realize the Ranchero is old so maybe an open-loop system would be my best bet but I could not even find that..
Any suggestions would be most appreciated.
Thank you,
Best Regards,
George
I have natural gas at my house so I am putting together an estimate to cost to convert vehicles to CNG. I have a 2009 Ford Escape 2.5l; 2006 Chrysler Town and Country 3.8l; 2006 Jeep Cherokee 4.0l; and my personal favorite 1994 motorhome F53 chassis with the 8 cyl 460. The motorhome also has a 7KW Onan generator that currently runs on gas..would like to convert it as well. There is a 30 gallon propane tank on board so I could convert the generator to LPG if that makes better sense to do.
At this point I think I would prefer to go bi-fuel on all of them.
Thanks
Scott, send me an E Mail at younkin@gmail.com with your contact info and the info on your cars. I will also be selling home fills soon, Jim
I have a 94 mustang with a 302 (not sure how many liters that is) How much am I looking at to convert?
A Ford 302 CID engine is 5.0 L. Are you sure you didn’t know that?
hi i talked to you about a 2007 sierra today. its a vortec 5.3 with 70000mi runs great.still gets 20mi highway. we talked about my flying up if you get a sequential engine to work on
We have three E-350, 8 cylinder engines we would like to see about
converting to CNG. We are in NC and I spoke with you about having
one of my guys trained to do these conversions. We also have an
F-350 Diesel we would also like to consider.
We will send you pictures of the Manifolds and area available for these
Tanks. In my opinion to put less than 20 Gallons of CNG would probably
not be worth the effort as these trucks normally run 200 miles per day.
At 12 MPG, this would give these trucks a 240 mile range, which would
be good.
Thanks,
Warren
Pingback: Propane conversion for the 4.0 - Page 5 - JeepForum.com
Hello, I am interested in quotes for two vehicles. One is a 2004 jeep rubicon with the 4.0 and manual tranny. The other is a 2007 mustang gt with the 4.6 and a manual tranny.
ESTIMATE
2011 Ford F150 5.0L, 21GGE Type 4 tank.
Hello, i have a 2009 ford escape 4cyl and love it…cost to convert to cng? Also, can it go gasoline/cng?
Thanks!
i have 2001 grand caravan Chrysler 308 6 cylinder which i would like an estimate on a conversion to CNG and if it is legal in new york state and N J
thanks
jack weil
Can you help with converting a ……
Make – Peterbilt
Model – 379
Engine size – CAT 425C
Year – 1995
running on part diesel and part natural gas…. if not do you know who we could contact to find out more information on a conversion.
Thank you,
Teresa
I would like to convert my 2001 minivan town and country to use natural gas with a 3.0l engine.
Hello, I’m looking into getting a CNG kit for my 08 Dodge Ram 2500 with the 6.7 Cummins turbo Diesel. Let me know what you think would be a good setup and what I can expect in terms of return on investment. Thanks so much.
Hi Mike :
I have an 09 Ram 3500 4×4 with 3.42 gears automatic. Did you install CNG kit your self ? How do you like it ?
What fuel economy do you get on the road ? … in town ? Do you still have your DPF filter installed ? ……EGR installed/working ? Any suggestions ?
Thanks Harry Hesidence
I have an HS Tuner that turned off my DPF and EGR systems with no fault codes.I am getting 18-19 mpg @ 60 mph on my truck
Is your truck a diesel or gasoline, Jim
I am getting burnt out reading,searching,clicking on all the cng info out there please send prices to purchase 2 kits we will do the install 2004 and 2006 jeep wranglers 6cylinder Thank You
I am looking to install a natural gas kit on a 2012 4 cylinder Ford Escape. If you could give me the location of a dealer and an estimate of the cost the information would be greatly appreciated.
Chuck Cook
I was needing an estimate for a 2000 Yukon XL 1500? thx,
Scott
Hello Jim
I live in California and drive a 1975 Mercedes 280C. It is a Carburated 6 cylinder engine. I am free of smog inspections and dont have to worry about inspections. I am having starring problems and thinking about converting it to fuel injection with Megasquirt. After that I think it is easier to convert to CNG.
I have 2. Questions. Can you start the engine on CNG?
Could I control the cng injectors with the Megasquirt ECU?
Would I save money not using a CNG Controller?
How much would a mit be?
Thanks
2001 Ford F150 engine 5.4 v8
Hi, I read your site and would like to get an estimate on a cng conversion. I would like a bid on the sequential injection system for a 2010 Nissan Titan 5.6 L V8. I would like to bid to be with a 9 gallon tank and also have installation costs quoted also. thank you for your time.
Jason
Hi Jim,
thanks for your site, I have a 2003 Toyota Sequoia, 4.7L engine, and would like to convert it to CNG. 1. Has someone already done this and if so who, what, when, where, and can I get contact info?
I am thinking of purchasing a new Toyota Tundra pu 2011, and wondered if anyone has converted theirs? Pls, send me some info.
Thanks,
Carter
This is really interesting, You are a very skilled blogger. I’ve joined your rss feed and look forward to seeking more of your magnificent post. Also, I have shared your website in my social networks!
I have an 04.5 dodge cummins it is the 5.9L would like to know how much it would be to add a cng kit?
It would cost around $2500 to convert, Jim
I have a Gas 2005 Chevy Silverado 1500 Ext Cab (Not HD), V8 5.3L
How much is a kit and tank for a CNG conversion?
Where do I get these installed?
A conversion with the aspirated system is around $3000 parts and labor, Jim
Hello. How much and where can I convert the v6 3L 2001
Avalon and v6 3.5L 2007 Murano? Home fuel station? How much?
Around 3000 apiece, 1500 labor, 1500 parts, Jim 801 427 2284
I have 2006 Chevy trailblazer and 1990 Chevy 1500 with 5.7 want to convert to NG
Can u call me 731-420-2572
I wanna convert my 2012 Cummins turbo Diesel. How much for a kit. I can do the installation myself.
I also have a 2002 Jeep Wrangler with a 4.0 liter i am interested in converting.
Thanks.
I have a 2000great Jeep Grand Cherokee Laredo with a 4.0 liter V6 and am wondering how much it would cost to convert it to COG?
Thank-you.
2000 ford ranger ex cab v6 4.0
Is it ok if I use part of your article in an article I am writing? I will credit you and link back to your article.
Hi, My name is Alejandro Galindez. I would like to receive a free CNG Conversition Estimate. I have a 1999 Ford Expedition XLT with 5.4 tritron engine. Currently, I have close to 150,000 miles on my Expedition.
Thanks
The kit is $$600, the tank is $1100 and the labor is $1500 here in Utah
I have a 2005 Silverado crew cab 5.3liter engine. How much for the conversion kit. I will install it my self. Thanks. John.
The kit is $600
Hi my name is emilio I own a 2002 ford expedition XLT 5.4 L v8 my address is 324 west page st St. Paul MN 55107 I would like to know what the cost of the cng kit and installation would be. Thanks
$3200 parts and labor here in Utah
Estimate Jimmy Ramsey, Rt2 Box 15095, Porum, OK 74455 ,19184419344, Dodge Ram 3500 4×4,5.9 Cummings, 2004.5
The kit is $500, the labor is $1500, and the tank is $1100
2003 GMC Yukon SLT 5.3.
Please get me a estimate to convert over to CNG
E mail me at younkin@gmail.com